非饱和带柴油入渗实验研究及HSSM模拟

通过土柱模拟实验研究了柴油在不同含水率、不同粒径砂土中的入渗及残留特征,并采用HSSM(Hydrocarbon Spill Screening Model)模拟了柴油在含水率为6%中砂介质中的入渗过程.结果表明:随着介质含水率增加,柴油在介质中湿润锋推进速度先增大后减小,最快速度对应含水率处于相应介质最大残余含水率40%~50%范围内,残余柴油量随介质含水率增大而减小.在细砂、中砂和粗砂3种介质,柴油入渗平均湿润锋推进速度分别为0.42,0.52,0.73cm/min;平均残余柴油量分别为98.10,68.70,48.79mL. 湿润锋推进速度及残余柴油量均与介质粒径呈负相关.HSSM拟合柴油在含水率为6%中砂介质中的湿润锋推进速度为0.5832cm/min,与实验值0.5689cm/min相比,相对误差为2.51%.HSSM能较好的模拟柴油在非饱和带入渗过程,对于土壤及地下水污染预报具有重要意义.     

FBC-DPF在柴油机颗粒物控制中的应用研究

目前针对加装FBC-DPF(燃油添加剂-柴油机颗粒捕集器)后的柴油机放特性研究较少,并且缺乏FBC-DPF对颗粒物中PAHs排放量的影响效果研究. 为全面评估加装FBC-DPF后柴油机颗粒物排放特性和FBC-DPF对柴油机尾气中的颗粒物排放污染控制效果,在发动机台架上对装有FBC-DPF的重型柴油机进行了颗粒物排放特性试验. 利用电子低压撞击仪(ELPI)测量加装FBC-DPF前、后柴油机颗粒物的数浓度与粒径分布,用玻璃纤维滤膜采集加装FBC-DPF前、后尾气中的固相PAHs,利用色谱质谱联用仪对加装FBC-DPF前、后尾气中的固相PAHs进行定量分析. 结果表明:①加装FBC-DPF后柴油机排放的颗粒物数浓度大幅降低,FBC-DPF对尾气中颗粒物的捕集效率平均值在95%左右;②加装FBC-DPF后柴油机固相PAHs总比排放量有所降低,在大负荷区域降幅在25.0%~88.0%之间;③加装FBC-DPF前的颗粒物中位直径为30~89nm,而加装FBC-DPF后的颗粒物中位直径为41~98nm,平均增幅为38.2%. 对于国Ⅳ及未来国Ⅴ柴油机排放法规,FBC-DPF是解决柴油机颗粒物排放的有效手段;此外,FBC-DPF可以大幅降低柴油机尾气中的有毒成分,并且能够适应高含硫量的燃油环境.      

Mutagenicity of diesel engine exhaust in the Ames / Salmonella assay using a direct exposure method

The aim of this study was to investigate the potential mutagenic activity of diesel engine exhaust in the Ames/Salmonella assay using a direct aerosol exposure system. So, TA 98 and TA 100 strains, with or without added S9 mix, were exposed to diesel emissions after varying degrees of filtration. Variants of these two strains, deficient in nitroreductase (TA 98NR and TA 100NR) or over-expressing O-Acetyl Transferase (YG 1024 and YG 1029), were also exposed to total (unfiltered) diesel exhaust to highlight the putative mutagenicity of any nitro-PAHs present in these emissions. Mutagenic activity of the diesel exhaust was demonstrated on Salmonella typhimurium, strains TA 100 and variants TA 100 NR and YG1029. The use of a particle filter did not modify the genotoxicity of the diesel emissions, indicating a major contribution of the gas phase to the mutagenicity of these diesel emissions. The prominent role of the particulate-associated nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) claimed by some authors working on diesel exhaust organic extracts was not confirmed by our results with native diesel exhaust exposure. Our results show that the gas phase is potentially more mutagenic than the particles alone.     

Assessment of hydrocarbon emissions from diesel invert mud residues treated in a bioreactor

Hydrocarbon emissions from a diesel invert mud residue (DIMR) were monitored while the hydrocarbons were being biodegraded in a solid‐phase bioreactor. Five to twenty percent of the reduction in diesel hydrocarbons was attributed to evaporation depending on the treatment, i.e. homogenization, cultivation, and aeration. Most of these volatile hydrocarbons were linear C₈ — C₁₂ alkanes and one‐ring aromatics. Of the treatments aeration had the largest effect on emissions; forced air through the bottom of the bioreactor cells increased emissions by three times over that of the non‐aerated cells. Cultivation increased hydrocarbon emission concentration as much as twofold over the pre‐cultivation value, however, emissions returned to the original levels within 12 hours. Homogenization had the least effect of all treatments. Diurnally, the emission rate was 40% higher in late afternoon than at midnight; the cause of which was probably atmospheric fluctuations such as temperature and solar radiation. The effects of daily atmospheric fluctuations were empirically modeled and taken into account for determining the total volume of emissions.     

Particulate and semivolatile associated aliphatic hydrocarbon exhaust emission from heavy duty diesel vehicles

The exhaust emissions from two heavy duty diesel vehicles running on eight different fuel compositions were investigated regarding their content of high molecular weight (≥ C₁₂) aliphatic/ olefinic hydrocarbons. It was concluded that the emitted amount of semi‐volatile associated aliphatic hydrocarbons (range C₁₂‐C₂₂) depend on the fuel used in the engines and that these emissions mainly consisted of uncombusted fuel components. It was also found that uncombusted engine lubrication oil was the main constituent of the emitted particulate associated aliphatic hydrocarbons (C₁₇‐C₄₀). These constituted between 58% and 95% of the total emissions of the high molecular weight aliphatic compounds. Emission factors for the total of high molecular aliphatic hydrocarbons (C₁₂‐C₄₀) were demonstrated to be in the range of 15–100 mg/km. Some individual aliphatic hydrocarbons with cocarcinogenic effects were identified and quantified in both particulate and semi‐volatile phases of the exhaust. Multivariate data analysis was used to investigate the relationship between fuel parameters and emission of semi‐volatile aliphatic emission.     

Build it,but will they come? Evidence from consumer choice between gasoline and sugarcane ethanol

How consumers might switch from gasoline and diesel to alternative energy sources is not known, since the availability of alternatives is currently very limited. To bridge this gap, we exploit exogenous variation in ethanol prices at Brazil's pumps and uncover substantial consumer heterogeneity in the choice between long-established gasoline and an alternative that is similarly available and usable: sugarcane ethanol. We observe roughly 20% of flexible-fuel motorists choosing gasoline when gasoline is priced 20% above ethanol in energy-adjusted terms ($/mile) and, similarly, 20% of motorists choosing ethanol when ethanol is priced 20% above gasoline. We use transaction-level data to explore “non-price” characteristics which differentiate the two goods in the minds of different groups of consumers. Our findings suggest—and a counterfactual illustrates—that switching away from gasoline en masse, should this be desired, would require considerable price discounts to boost voluntary adoption, in the US and elsewhere.     

基于模拟植物生长算法的快线公共车辆优化调度研究

公共车辆的运营优化调度能够很好的减少城市交通拥堵,缓解交通压力,保证多方面的利益。对乘客高峰期快线公共车辆的调度进行了研究。首先运用了三元组α/β/γ方法对问题进行了描述,将乘客高峰期快线车辆的调度描述为一类以最小化制造期和平均等待时间为目标,具有先入先出原则和机器适用限制的流水车间动态调度问题。并在此基础上建立了相应的数学模型;接着,运用模拟植物生长算法进行了算法设计;最后,用实际数据进行了数值仿真,结果证明该研究具有较高的理论及现实价值。     

Effects of a diesel oxidation catalyst on gaseous pollutants and fine particles from an engine operating on diesel and biodiesel

The effects of a diesel oxidation catalytic (DOC) converter on diesel engine emissions were investigated on a diesel bench at various loads for two steady-state speeds using diesel fuel and B20. The DOC was very effective in hydrocarbon (HC) and CO oxidation. Approximately 90%–95% reduction in CO and 36%–70% reduction in HC were realized using the DOC. Special attention was focused on the effects of the DOC on elemental carbon (EC) and organic carbon (OC) fractions in fine particles (PM_2.5) emitted from the diesel engine. The carbonaceous compositions of PM_2.5 were analyzed by the method of thermal/optical reflectance (TOR). The results showed that total carbon (TC), OC and EC emissions for PM_2.5 from diesel fuel were generally reduced by the DOC. For diesel fuel, TC emissions decreased 22%–32% after the DOC depending on operating modes. The decrease in TC was attributed to 35%–97% decrease in OC and 3%–65% decrease in EC emissions. At low load, a significant increase in the OC/EC ratio of PM_2.5 was observed after the DOC. The effect of the DOC on the carbonaceous compositions in PM_2.5 from B20 showed different trends compared to diesel fuel. At low load, a slight increase in EC emissions and a significant decrease in OC/EC ratio of PM_2.5 after DOC were observed for B20.     

机械化学法修复柴油污染土壤的效率、产物及影响

针对常规污染土壤修复处理方法存在有毒降解产物、容易产生二次污染等问题,本研究采用行星球磨仪研究了机械化学法（MC）对柴油污染土壤的修复效能,利用GC/MS对柴油烃组分的降解产物进行分析,并采用SEM、XRD、BET、FTIR和TGA等方法对不同处理条件下的土壤样品进行表征.结果表明,MC处理在0.5~4.0 h内对土壤中总石油烃（TPH）的去除率可达95%以上.随着初始TPH浓度和球土质量比的升高,TPH去除率随之提高.采用MC处理后柴油组分降解难度顺序如下：烷烃<烯烃<环烷烃<芳香族化合物.在球磨处理4 h后,未检出有毒有害残留物质.球磨后土壤粒径变小,表面变粗糙,粘土矿物中的硅氧四面体暴露在土壤表面,矿物结构的结晶度逐渐降低,晶体结构逐渐破裂或变形,可在土壤表面形成富电子区域或促使土壤具有更高的反应活性,这是机械化学法高效降解柴油的主要机制.其次,土壤有机质的主要官能团受到破坏,纳米级孔隙容量降低,从而降低了土壤组分的吸附能力,增加了柴油的有效性,也有助于柴油的解吸和机械化学降解.此外,随着球磨时间的增加,土壤有机碳（SOC）含量先增加后下降,但均高于处理前.可见,MC处理可以快速彻底降解土壤中的柴油,且有利于增加土壤有机碳含量,对于石油烃污染土壤修复具有较好的应用潜力.     

SAFEST TO TRAVEL BY BICYCLE,CAR, OR BIG TRUCK?

This study compares highway crash incidence, injuries, and costs by vehicle type. Annual crash and injury incidence were estimated using Crashworthiness Data System (1988-1991), National Automotive Sampling System (1982-1986), General Estimates System (1992-1993), and Fatal Analysis Reporting System (1993) data. Costs were computed based on restraint use, body region, and threat-to-life severity of the injury. Costs were then allocated between vehicle types using three different methods in order to answer comparative safety questions. Motor vehicle and bicycle crash costs total $389 billion annually; 75% resulting from passenger vehicles. Motorcycles and bicycles have the highest costs per 1000 vehicle and passenger miles; costs per victim are highest for pedestrians, bicyclists, and motorcyclists. Costs per vehicle mile for heavy trucks and passenger cars are comparable but exceed costs for light trucks. Passenger vehicle occupants are safest if a crash occurs. Light truck, other single truck, and bus occupants have the lowest cost per passenger mile, but higher costs than air and rail travelers. Motorcyclists face the greatest risks. Combination trucks may not impose an excess risk to other drivers, but their drivers face large risks.